manualshive.com logo in svg

SKC 701-001, Operating Instructions Manual, Page: 16 / 18

Share
Download
SKC 701-001 Operating Instructions Manual Download Page 16

skcinc.com 

Form 37169 Rev 210311 

Page 16 

 

 

Install DataTrac dB Software 

The NoiseCHEK noise dosimeter communicates with a PC via USB cable and charging dock (1-unit or 5-
unit) and DataTrac dB Software (

Figure 5

). Connect up to five NoiseCHEK dosimeters in the 5-unit 

charging dock to upload settings.  

 

1.  Connect charging dock to PC using included USB cable.  
2.  Download from 

https://www.skcinc.com/catalog/datatrac/DataTracdB/setup.exe

 or 

copy from USB drive “setup.exe” and install DataTrac dB as instructed. DataTrac 
dB will launch automatically. 

The DataTrac dB Installer requires administrator privileges 
to install properly.  

3.  Place noise dosimeter(s) in the charging dock to complete 

the communication train (

Figure 5

). 

Note: DataTrac dB will only 

detect dosimeters that are properly seated in the connected 
charging dock. 

 

To program and upload settings to your noise dosimeters and download run data to your PC, see the 
DataTrac dB Software for NoiseCHEK User Manual. 

 

Figure 5.

 

Communication Train

 

Summary of Contents for 701-001



















Reviews:

No comments