
skcinc.com
Form 37169 Rev 210311
Page 12
Sample
•
To schedule a timed sample run, see DataTrac dB Software for NoiseCHEK User Manual.
•
For details about Secure Lock and Auto Lock, see Lock Feature.
1. After successful calibration, from the Home screen press the green button.
See below
.
Note: Attach the dosimeter to the worker in Step 2 before selecting YES to
begin
sampling.
2. Attach NoiseCHEK on
worker’s shoulder.
See Attaching Noise Dosimeter on a Worker.
3. Select YES (press green button) to begin sampling. The run indicator will appear at the top right
of the screen (
see below right
).
a.
To pause sampling,
press and hold green button. Select Yes (press green button) to
confirm. The pause indicator appears at top right on the screen.
See below
.
Note: If Auto
Lock is enabled, you will be prompted to enter the four-digit PIN using the buttons on the
dosimeter to select the PIN digits
.
See Lock Feature.
NoiseCHEK will remain powered on
but sampling will stop (timer will not increment further) and data will stop accumulating.
Start sampling.
Confirm start sampling.
Run
indicator
Sample running
Pause
indicator
Sample paused.
While sample is running,
press and hold green button.
Confirm pause
.
Enter PIN if required
.