
skcinc.com
Form 37169 Rev 210311
Page 14
Reviewing Data (History)
The History (data) view (
below left
) appears after a sample run ends (after post-calibration) and when you
press the History button from the Home screen.
1. View the run data.
a. Use Previous/Next buttons to scroll through and view the run data for each programmed
virtual dosimeter. After viewing the last virtual dosimeter data, you will be prompted to go
to the History list or to return to the Home screen (
see below
). Select LIST (press green
button) to go to the History list.
OR
b. From the History view of any virtual dosimeter, press the green button.
2. Scroll to the desired sample run and choose SELECT (press green button).
Review data from the History views on the NoiseCHEK device, on your PC using DataTrac dB software
(
see Using DataTrac dB Software
), or on your mobile device using the SKC SmartWave dB mobile app.
Upload and print summary reports from PC or mobile app. Upload a more detailed report (comp
time history) from your PC.
Note: All the data needed to comply with OSHA is in the summary report.
Lock Feature
Secure Lock
: When activated, a four-digit PIN (using numbers 1, 2, 3, 4) designated in
DataTrac dB Software is required to connect to the mobile app. Secure Lock must be
activated to enable Auto Lock (
see below
). Lock icon appears on screen.
Auto Lock
: When this feature is activated, the PIN designated for Secure Lock is required to
stop
or
pause
sampling but
not
to start the device.
View sample run data
Select list of sample runs
Select run from list