skcinc.com
Form 37169 Rev 210311
Page 13
b.
To resume sampling
, press and hold green button and confirm by selecting YES (press
green button).
See below.
The timer will continue where it left off, and data will continue to
accumulate.
4. Stop sampling by pressing and holding the red button. Select YES (press green button) to
confirm
.
Note: If Auto Lock is enabled, you will be prompted to enter the four-digit PIN
.
See Lock
Feature
.
5. Remove the device from t
he worker’s shoulder. Review sample history or return to Home screen
by pressing the red button or History button.
6. Proceed to Post-calibrate.
Post-calibrate
•
Each time NoiseCHEK is calibrated, it displays the
calibration values obtained “Before” and
“After” calibration and stores them. For post-calibration, use the “Before” value.
1.
See Calibrate, Steps 2 through 6.
2. Review data.
See Reviewing Data (History
).
Resume sampling.
Confirm resume sampling.
Stop sample run.
Confirm stop.
Enter PIN if required
.