skcinc.com
Form 37169 Rev 210311
Page 5
Charging Train in Carry Case with Charging Cable Installed
The carry case for Cat. Nos. 701-001K3, 701-001K3-C, 701-001K5, and 701-001K5-C has a charging
cable installed and a power jack for connection to the
charging dock and power supply for charging
in the
case.
See Figure 2b.
1. Prepare 5-unit Charging Dock Cat. No. 701-003.
a. Insert the built-in charging cable into the power jack on the back of the charging dock.
b. Plug power supply Cat. No. 220-600 into the power jack on the side of the case; plug the
power supply cube into a 100-240 V power supply. The power LED on the back of the
dock will light up blue when connected to the power supply.
Figure 2b. Charging Train in Carry Case with Charging Cable Installed
2. Place the dosimeters in the prepared charging dock. Battery charging status bars will be
displayed on the dosimeter screens; five amber LEDs will blink during charging. Full charge is
indicated by five green blinking LEDs.
Note: When batteries are fully charged, the LCDs
(displays) will shut down. The green LEDs will continue blinking while the dosimeters remain in
the charging dock.
Note: Do not keep dosimeters in charging dock during transport.
Charging cable
100-240 V
Wall outlet
Power supply
Power jack (on back
of charging dock)
5-unit Charging Dock
Power jack on case