sitrex MK14 MY15, Assembly

Page: 9 / 38

9
6)
DANGER
Check that manufacturer
has assembled on the
vertical supports 1-2
(RH-LH) the pins 5,
spacers 6, washers 7 and
nuts 8 that you will use
for assembly in the
order in which you find
them assembled.
Check that manufacturer
has assembled the
bushings B to their seats
on sections 3-4 (RH-
LH).
Now attach sections 3-4
(RH-LH) to the seats on
the vertical supports 1-2
(RH-LH) using the pin
5, spacer 6, washers 7
and nuts 8.
Once sections 3-4 are
attached, set them on a
support A. Now apply
the grease nipples 9 to
the openings in sections
3-4.
6)
DANGER
In this step, you will use:
Item 5: 2 pins ø35x450 (ø1.38”x17.72”)
Item 6: 2 spacers ø35-52x1.5 (ø1.38”-2.05”x 0.06”)
Item 7: 2 washers ø23-50x4 (ø0.91”-1.97”x 0.16”)
Item 8: 2 nuts M22 (0.87”)
Item 9: 2 grease nipples M8 (0.32”)