sitrex MK14 MY15, Assembly

Page: 12 / 38

12
10) DANGER
Attach the plate with bolt 2
underneath flange 1. Attach the
counterplate 3 over flange 1,
inserting the counterplate pins A
into the holes in the plate with bolt
2 and into holes B in the sections.
Place the bushing 4, spring 5 and
washer 6 over the plate 2 bolt and
put nut 7 on the bolt.
Note: the more spring 5 is
compressed by tightening nut 7, the
more the turning of the wheel is
braked, therefore check that it is
adjusted properly when the
machine is to be operated (see
machine use).
In this step, you will use:
Item 4: 2 bushings ø13-18x20
(0.5”-0.71”x0.79”)
Item 5: 2 springs ø5-30x45
(0.20”-1.18”x1.77”)
Item 6: 2 washers ø12-36x4
(ø0.47”-1.42x0.16”)
Item 7: 2 nuts M12 (0.47”)
11)
You have now reached this stage
of the assembly. The machine
rests on its wheels and thus has
good stability. However, continue
to use great caution during the
rest of the assembly, so as to work
safely. In order to work better,
spread apart the right and left
sections of the machine.