sitrex MK14 MY15, Assembly

Page: 7 / 38

7
3)
DANGER
The tie rod 4 is preassembled to the right size for it to be attached to seat A on the
crosspiece assembly 1 and to seats C on the vertical supports 2-3. Part B of tie rod 4
goes to seat A on the crosspiece assembly 1 and part D goes to seat C on the vertical
supports 2-3. If a small adjustment must be made to adjust the length, loosen nut E,
rotate the head D until it reaches the right length, then lock in place with nut E. Connect
fork B on tie rod 4 to seat A on the crosspiece assembly 1 and part D of tie rod 4 to part
C of supports 2-3 using the pins 5, washers 6 and nuts 7.
In this step, you will use:
Item 5: 4 pins ø25x58 (ø1”x2.28”)
Item 6: 4 washers ø12-36x4 (ø0.47”- 1-42” x 0.16”)
Item 7: 4 nuts M12 (0.47”)