sitrex MK14 MY15, Assembly

Page: 15 / 38

15
15) DANGER
Check to make sure the manufacturer has correctly secured the bushings C with
retaining rings D on all the RH and LH sections.
In this assembly position holes F in pipes 1-3 are not used.
Starting from bracket A for the 16-rake wheel machine and from bracket B for the
14-rake wheel machine, insert pipe 1 (L.2515mm-99.01”) into all the brackets B until
reaching pipe E already assembled by the manufacturer. Join pipe 1 to pipe E using pin
4, bolts 5 and nuts 6.
Now, starting from bracket A for the 16-rake wheel machine, insert pipe 2
(L.2415mm-95.07”) into all the brackets B until reaching pipe 1. Join pipe 2 to pipe 1
using pin 4, bolts 5 and nuts 6.
Now, starting from bracket B for the 14-rake wheel machine, insert pipe 3
(L.1670mm-65.75”) into all the brackets B until reaching pipe 1. Join pipe 3 to pipe 1
using pin 4, bolts 5 and nuts 6.
In this step, you will use:
Item 4: 4 pins ø25-35x158 (ø1”-1.38”x6.22”)
Item 5: 8 bolts M8x45 (0.31” x1.77”)
Item 6: 8 nuts M8 (0.31”)