Round Baler ACTION 120
USE AND MAINTENANCE MANUAL - 30 -
5.10.2 Side adjustment of binding
The binding distance at the end of the bale can be
adjusted using two adjustable twine-guide screws
located to the rear of the binder on the right and
left (Pic. 17).
Pic. 17
– Side adjustment
5.11 NET BINDING
In order to prepare the machine for binding with
net wrap, proceed as follows:
-
Insert the roll of netting in the relevant
container and arrange it so that the it unravels
as illustrated in Pic. 18.
-
Next, feed the end of the netting between the
rubber roller (Pic. 19) and metal roller by
approx. 15 cm, past the linking rod (Pic. 19).
Pic. 18
– Net insertion
Pic. 19
– Net passage
DANGER
For avoiding the accidental click of knife,
during this operation keep opened the rear
door of baler. It is absolutely avoid put the
hands between the knives and counter-knives.
-
Control the correct insertion of net.
-
Cut the excess portion of net. For recharging
the net holder it is necessary to open the front
door of the baler. During the working phase
the recharging of knife is automatic every time
you open the rear door for unloading the bale.
5.11.1 Reset the net wrap binder
Pic. 20
– Knife resetting
The knife of the netting binder is reset by means
of the steel cable (Pic. 20) when the unloading
