Round Baler ACTION 120
USE AND MAINTENANCE MANUAL - 12 -
Never exceed the prescribed RPM at the
power takeoff.
Always disengage the power takeoff when the
cardan shaft forms a too wide with the P.T.O.
(for shaft type) and when it is not in use.
Do not perform any work on the hydraulic
system without first relieving the pressure.
The Hydraulic system of the round baler
contains tanks that can remain under
pressure even after detachment from the
tractor, the maintenance on the hydraulic
system can be operated only by skilled
personnel.
It is strictly forbidden to stand in between the
tractor and the equipment (pic.3) with the
engine on, and without having activated the
packing brake and having inserted, under the
wheels, a
clamping
block
of
suitable
dimensions.
Pic. 3
– Hazard zones
In case of jamming of the collection and
harvesting group, it is strictly forbidden to
operate on the machine with the P.T.O. and
the tractor on. Stop the engine, pull on the
packing brake and take off the key from
the command panel.
Moving out from the working area, must be
carried on with the equipment in position of
transport.
Before starting the machine, verify the
standing foot is left up and that the machine
has been mounted and set properly; also
verify that all the parts subjected to usury and
deterioration are efficient.
Always keep oils and greases out of reach of
children.
Always carefully read advice and precautions
indicated on all containers.
Avoid contact with skin of dangerous
substances.
After using the above substances, wash
hands carefully.
All maintenance, regulations and work starting
operations, must be done compulsory with the
machine leaned on the ground by the standing
foot, tractor turned off, well stopped and key
off the dashboard.
Should the machine be used on public roads,
follow the traffic laws in force in the country
where the machine is used.
It’s very important to bear in mind that the
road grip, direction and brake capacity, can be
influenced, also remarkably, by the presence
of hold or towered equipment.
On the curves, pay attention to the centrifugal
force exercised in a different position, by the
center of gravity, with or without towered
equipment.
Hook the equipment, as foreseen, to a tractor
having a suitable power and configuration, by
the proper device (drawbar), as per the local
regulations of the country the machine is used
in.
Pay maximum attention during the hook and
unhook phases of the machine.
Respect the maximum foreseen weight on the
axis, the total moving weight, transport rules
and traffic laws of the country where
operating.
Eventual transport accessories must be
provided with suitable signs and protections.
Regularly verify the integrity of the machine
and protection devices.
Respect the conformity of suggested oils
indicated on the identification plates and on
this manual.
During repair and maintenance operations, it’s
compulsory to use protections clothing such
as: protection glasses, cut resistant gloves,
sturdy and anti-crushing shoes.
Duly operate the maintenance as indicated in
this manual: skilled personnel will have to take
care to substitute damaged and worn parts.
In case of use of the round baler together with
other machines (i.e.: bale wrappers or carts
for hay bales), make sure of the dimensions
and/or weight of the bales that can fit these
machines before proceeding with the work.
