USER´S MANUAL – Sitmed Equipamentos Médicos Ltda
18
O² CYLINDER HOLDER
1. Sitmed’ cylinder holder is designed to accommodate cylinder up to 23cm in diameter. To fasten the cylinder, use the Velcro straps (A), By
passing them through the bars on the back of the holder. 2. The holder should be carried in one of the side handles of the stretcher. To fit
the holder, tilt it slightly (B) and attach the rear tabs on the side handle (C). This operation serves both for placement and withdrawing the
support. 3. A wall clip also comes along. To allow the holder / cylinder to be carried inside the ambulance (D). To install the clip choose a
free wall inside the ambulance, brace the clip on the wall, mark the hole and secure with the supplied hardware.
PARTS AND FEATURES
A) Slim, lightweight and compact.
B) Additional support casters.
C) Rubber castors with a diameter of 127mm and a brake system.
D) Safety belts with automotive locks.
E) Mattress density 33, coated in 100% waterproof material, sewn electronically.
F) Lateral collapsible handles with double lock system.
G) Backrest (fowler) with adjustment in 8 positions.
H) Aerial axle with rubberized castors and height adjustment system.
I) Telescopic system for articulation of the legs.
J) Legrest with multiple positions.
K) IV Pole
L) Medrac
BI-ARTICULATED COT MWS 320 – LEVEL UP II
A
G
F
D
B
E
C
C
H
I
J
K
L
