USER´S MANUAL – Sitmed Equipamentos Médicos Ltda
11
4. To open or close the seat belt press the red button on top of the piece hitch, introducing or removing the metal hitch. 5. If necessary
adjust the strap pressing the metal latch and pulling the upper part of the belt.
6. For patient safety always use the 4-point seat belt. The 4-point belt should be passed over the patient's shoulders and attached to the
chest belt. 7. The belts must be removed periodically for cleaning or replacement. To remove them or to put them in the cot pass the
couplings inside the base handle, trapping it in the structure of the cot.
The cot ambulance fastener installation kit contains the following items:
A) 01 – Aluminum “V” guide with stoppers.
B) 01 – Locking “turtle”, with adjusting rail.
C) 08 – M8 pressure washer.
D) 08 – M8 X 65 Screws.
E) 08 – Plater washer 5/16.
F) 08 – M6 X 50 self-tapping screw.
G) 08 – M8 nuts.
The first step for installing the cot is to adjust the position of the locking turtle on the lateral side its adjusting rail. For this, loosen the turtle
attachment screws (A), adjust the turtle causing the kingpin orifice to be centered along the rail (B). To finish, retighten the screws (A).
SETTLING
B
C
E
G
D
F
A
4
5
6
7
