USER´S MANUAL – Sitmed Equipamentos Médicos Ltda
4
WARNINGS
Carefully read all instructions in this manual and the individual instruction booklet that came with the equipment. If
there is any doubt please contact us immediately with our technical sector through
or by phone: (54) 3292 1024.
Sitmed® shall not be liable for any damages or accidents arising from the use of this equipment in contravention
with the instructions contained in this manual or in the instruction leaflet accompanying the equipment. For an
extended life do not expose or use this equipment under adverse conditions, such as: Rain, moisture, heat or
excessive cold.
This equipment follows with factory presets. Before using, check that all necessary adjustments are in accordance
with the manual. Never use the equipment if it is exhibiting strange behavior, malfunction or failure in any of its
mechanisms.
Never carry out exchange of parts or any maintenance that may change the structure of the equipment, without
first contacting our technical department.
Always observe the load limit stipulated for each equipment. Sanitize the same periodically or after each use.
Follow the preventive maintenance schedule performing the same according to the instructions in this manual.
All products and components used by Sitmed are recyclable. Before disposing of parts or unused equipment check the
need for disinfection or sterilization of the same. If there is any doubt or difficulty, return the equipment to the correct
disposal in our factory.
All patient handling procedures must be accompanied by trained and qualified professionals. Never leave any patient
unattended while using any of the equipment. Always follow safety guidelines during displacement.
All Sitmed equipment included in this instruction manual are
NON STERILE.
NON
STERILE
All Sitmed cots and it´s fasten system are tested to support 10G impacts to asure the safe from the ambulance
passangers. If some impact happens with the ambulance the cot and the fasten system must be descarted and replaced.
Static load capacity refers to the structural load capacity of the equipment, without dynamic movement. Dynamic
load capacity refers to the load capacity of the equipment when subjected to adverse transport situations, such as:
Twisting, obstacles, steps,
uneven terrain, shocks, etc ...
