Sitecom X6 N900 User Manual Download Page 2

Page: 2 / 60

Table of Contents

Introduction .......................................................................................................... 3

Key Features ......................................................................................................... 4

Package Contents .................................................................................................. 5

Cautions ............................................................................................................... 6

Product Layout ...................................................................................................... 7

N System Requirements ............................................................................ 9

Setup your Router ................................................................................................10

Setup your Computer ............................................................................................11

Configure your Internet connection .........................................................................15

Configure your Router ...........................................................................................18

Wireless Settings ..................................................................................................23

Firewall Settings ...................................................................................................31

Advanced Settings ................................................................................................35

Toolbox Settings...................................................................................................41

Addendum A: USB Port Control Center ....................................................................48

Addendum B: Declaration of Conformity ..................................................................59

Revision 2.1

Note: All the information contained in this manual was correct at the time of publication.

However, as our engineers are always updating and improving the product, your device’s
software may have a slightly different appearance or modified functionality than
presented in this manual.

Summary of Contents for X6 N900





























































Search results

Summary of Contents for X6 N900

Reviews:

Related manuals for X6 N900

Brands by name

Popular brands

Sitecom X6 N900, User Manual

Search results

Summary of Contents for X6 N900

Reviews:

Related manuals for X6 N900

Brands by name

Popular brands