Sitecom X6 N900, User Manual

Page: 30 / 60

want to use the PIN code, you have to know the PIN code of the wireless client and
switch it to WPS mode, then fill-in the PIN code of the wireless client through the web
configuration interface of the wireless router.
• WPS : Check the box to enable WPS function and uncheck it to disable the
WPS function.
• WPS Current Status : If the wireless security (encryption) function of this
wireless router is properly set, you’ll see a ‘Configured’ message here.
Otherwise, you’ll see ‘UnConfigured’.
• Self-Pin Code : This is the WPS PIN code of the wireless router. You may need
this information when connecting to other WPS-enabled wireless devices.
• SSID : This is the network broadcast name (SSID) of the router.
• Authentication Mode : It shows the active authentication mode for the
wireless connection.
• Passphrase Key : It shows the passphrase key that is randomly generated by
the wireless router during the WPS process. You may need this information
when using a device which doesn’t support WPS.
• WPS via Push Button : Press the button to start the WPS process. The router
will wait for the WPS request from the wireless devices within 2 minutes.
• WPS via PIN : You can fill-in the PIN code of the wireless device and press the
button to start the WPS process. The router will wait for the WPS request from
the wireless device within 2 minutes.