Sitecom X6 N900 User Manual Download Page 46 | Manualshive

Page: 46 / 60

background image

Click

Apply

at the bottom of the screen to save the above configuration.

Firmware Upgrade

Enable automatic firmware update

: When enabled the router will periodically check if

a new firmware is available. If a new firmware is detected the router will give a
notification.

Firmware Upgrade

: This tool allows you to upgrade the Broadband router’s system

firmware. To upgrade the firmware of your Broadband router, you need to download the
firmware file to your local hard disk, and enter that file name and path in the appropriate
field on this page. You can also use the Browse button to find the firmware file on your
PC.

Once you’ve selected the new firmware file, click

Apply

at the bottom of the screen to

start the upgrade process.

Backup Settings

The Backup screen allows you to save (Backup) the current configuration settings. When
you save the configuration setting (Backup) you can re-load the saved configuration into
the router through the Restore selection. If extreme problems occur you can use the
Restore to Factory Defaults selection, this will set all configurations to its original default
settings (e.g. when you first purchased the router).

«
...
44
45
46
47
48
...
»

Summary of Contents for X6 N900





























































Reviews:

No comments

Related manuals for X6 N900

Monitouch V9 Series

Brand: Hakko Electronics Pages: 16

Brand: InfiNet Wireless Pages: 100

Brand: Z-Com Pages: 23

Brand: StarTech.com Pages: 2

Brand: Ubiquiti Pages: 13

AceroDURO 100/S100

Brand: CNC-Step Pages: 86

Brand: Link-One Pages: 77

Brand: Teldat Pages: 24

Brand: AQL Pages: 3

Brand: Planet Pages: 37

Brand: NETGEAR Pages: 2

Brand: Rosewill Pages: 8

Brand: Airlink101 Pages: 56

Brand: Linksys Pages: 49

Brand: Linksys Pages: 70

Brand: D-Link Pages: 64

Brand: D-Link Pages: 3

Brand: D-Link Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands