Sitecom N750 X6 User Manual Download Page 11

Page: 11 / 139

N System Requirements

To begin using the WLR-6001, make sure you meet the following as minimum

requirements:

•

PC/Notebook.

•

Operating System – Microsoft Windows XP/2000/VISTA/7

•

1 Free Ethernet port.

•

WiFi card/USB dongle (802.11 b/g/n) – optional.

•

External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45).

•

PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)

•

Ethernet compatible CAT5e cables.

WLR-6001 Placement

You can place the WLR-6001 on a desk or other flat surface, or you can mount

it on a wall. For optimal performance, place your Wireless Broadband Router

in the center of your home (or your office) in a location that is away from any

potential source of interference, such as a metal wall or microwave oven. This

location must be close to a power connection and your ADSL/Cable modem.

Summary of Contents for N750 X6












































































































































Search results

Summary of Contents for N750 X6

Reviews:

Related manuals for N750 X6

Brands by name

Popular brands

Sitecom N750 X6, User Manual

Search results

Summary of Contents for N750 X6

Reviews:

Related manuals for N750 X6

Brands by name

Popular brands