37
indication of signal strength . The
Satellite and Terrestrial bars show the
strength of the signal being received .
If the signal reception is good, exit the
Antenna Aiming or Signal Indicator
screen and continue with step 8 .
8.
Turn on your vehicle’s stereo system .
Set it to play input from the auxiliary
input source . You should hear the
audio through your vehicle’s stereo
system . The aux in cable installation is
complete .
9.
The audio level output of the Radio
can be increased or decreased as
necessary to match the audio levels of
other sources in your vehicle . Refer to
your Radio’s User Guide (go to
www .
siriusxm .com/guides
) for instructions .
10.
Go back to “Step 2: Install the Dash or
Vent Mount” on page 13 and finish
installing the Dash or Vent Mount . Then
the installation is complete .
If the signal reception is good, showing at least two bars of antenna signal
strength, but there is no audio, be sure the vehicle’s stereo system is set
to the auxiliary input source (step 8) . Also be sure that the audio level is
set high enough to be heard (step 9) . Refer to “Troubleshooting” on page
43 for additional help .
*The screens shown above are repre-
sentative and may differ from the
screens displayed on your Radio .
Vehicle Installation