41
radio to tune through each FM channel one-by-one (88 .1 followed by 88 .3
etc .) to locate channels that aren’t being used by a local FM radio station .
Write down each FM channel that has only static or silence on it, until you
reach 107 .9 .
5.
Pick the first FM channel on your list from step 4 . Turn on your vehicle’s
FM radio (if you have not already done so) and tune it to this FM channel .
6.
Power on your Radio by pressing the
Power button
.
7.
Be sure the vehicle is outside and
the antenna has a clear view of the
sky . Verify that you are receiving the
satellite signal . There should at least be
two bars on the the main display screen
that denotes antenna signal strength .
You can also refer to your Radio’s
User Guide (go to
www .siriusxm .com/
guides
) for instructions on accessing
the
Antenna Aiming
or
Signal Indicator
screen of your Radio, to see a visual
indication of signal strength . The
Satellite and Terrestrial bars show the
strength of the signal being received .
If the signal reception is good, exit the
Antenna Aiming or Signal Indicator
screen and continue with step 8 .
8.
Set your Radio to transmit on the same
FM channel that you have selected in
step 5 . You may need to turn On the
FM Transmitter in your Radio first .
Refer to your Radio’s User Guide (go
to
www .siriusxm .com/guides
) for
*The screens shown above are repre-
sentative and may differ from the
screens displayed on your Radio .
Vehicle Installation