15
Installing the Vent Mount:
IMPORTANT!
To make the cable connections easier, wait until after you have
connected all the cables to the dock before you attach the Vent Mount to a
vent .
1.
Locate a vent with horizontal louvers sturdy
enough to hold your
Power
Connect Vehicle
Dock and Radio .
2.
If the vent louvers in your vehicle are
recessed, you may need to use the longer
vent clamps with the Vent Mount . If so,
remove the shorter vent clamps and install
the longer ones into the Vent Mount . Be
sure to observe the orientation of the vent
clamps as shown .
Slide Short Vent Clamps Out
Remove End Cap
Slide Extended Vent Clamps In
Replace End Cap
Extended Vent Clamps
Short Vent
Clamps
Vehicle Installation
