31
SUV:
1.
Feed the antenna cable underneath the rubber weather stripping of
the rear tailgate window/door and route the cable along the rear hatch .
Lift the weather stripping from the opening and tuck the cable inside
it, then replace the weather stripping . Pull the cable out from weather
stripping and route it into the cabin under the interior trim . Avoid
hinges or gears that could crimp or cut the cable .
2.
Route the cable through the SUV’s main cabin area under the interior
trim, towards the front of the vehicle . Use a blunt plastic putty knife or
similar blunt tool to lift the plastic trim just enough to tuck the cable
under underneath . Avoid side airbag locations on back pillars and
above the doors . Airbag locations are marked with “SRS” logos . Be
careful not to crimp or cut the cable .
3.
Bring the cable out from the trim near the front of the cabin and route
it under the carpet toward the dashboard or console . Coil any excess
cable in a hidden location, such as under the carpet, keeping it away
from any vehicle pedals or controls . Secure the excess cable with wire
ties (purchased separately) .
4.
Bring the end of the cable out at
the
Power
Connect Vehicle Dock
location . Leave yourself enough
cable so you can easily connect it
to the antenna connector of the
dock .
5.
Continue with “Step 5: Connect
the Magnetic Mount Antenna and
Power
Connect Power Adapter” on
page 34 .
Vehicle Installation
