30
Sedan/Coupe With the Antenna Placed at the Front of the Roof:
1.
Feed the antenna cable from the antenna underneath the rubber
molding around the windshield . Use a blunt plastic putty knife or
similar blunt tool to lift the rubber molding around the windshield and
tuck the antenna cable underneath the molding . Route the antenna
cable around and down the windshield to the lowest point .
2.
At the lowest corner of the windshield, route the cable out of the
windshield molding and into the rubber weather stripping around the
door opening . Lift the weather stripping from the opening and tuck the
cable inside it, then replace the
weather stripping . Run the cable
inside of the weather stripping
to the bottom of the door
opening .
3.
Pull the cable out of the weather
stripping at the bottom of
the door opening and route it
under the carpet toward the
dashboard . Coil any excess cable
in a hidden location, such as under the carpet, keeping it away from
any vehicle pedals or controls . Secure the excess cable with wire ties .
4.
Bring the end of the cable out at the
Power
Connect Vehicle Dock
location . Leave yourself enough cable so you can easily connect it to
the antenna connector of the dock .
5.
Continue with “Step 5: Connect the Magnetic Mount Antenna and
Power
Connect Power Adapter” on page 34 .
Vehicle Installation
