4
SAFETY INSTRUCTIONS
IMPORTANT:
Please read the following instructions carefully,
failure to do so could
lead to serious personal injury and / or damage to the Belt Disc Sander.
When using your belt disc sander, basic safety precautions should always be followed
to reduce the risk of fire, electric shock, personal injury and / or damage to the belt
disc sander. Read all these instructions before operating the belt disc sander and
save this user manual for future reference.
SIP
recommends that this belt disc sander should
not
be modified or used for any ap-
plication other than that for which it was designed. If you are unsure of its relative ap-
plications do not hesitate to contact us and we will be more than happy to advise
you.
KNOW YOUR BELT DISC SANDER:
Read and understand the owner's manual and labels
affixed to the belt disc sander. Learn its applications and limitations, as well as the po-
tential hazards specific to it.
DO NOT USE THE BELT DISC SANDER IN DANGEROUS ENVIRONMENTS:
Do not use your
belt disc sander in damp or wet locations, or expose it to rain. Always provide ade-
quate space around the belt disc sander.
KEEP CHILDREN AND UNTRAINED PERSONNEL AWAY FROM THE WORK AREA:
All visitors
should be kept at a safe distance from the work area.
STAY ALERT:
Always watch what you are doing and use common sense.
DISCONNECT THE BELT DISC SANDER FROM THE MAINS SUPPLY:
When not in use.
DO NOT ABUSE THE MAINS LEAD:
Never pull the mains lead it to remove the plug from
the mains socket. Keep the mains lead away from heat, oil and sharp edges. If the
mains lead is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid unwanted hazards.
HAVE YOUR BELT DISC SANDER REPAIRED BY A QUALIFIED PERSON:
The belt disc sander
is in accordance with the relevant safety requirements. Repairs should only be carried
out by qualified persons using original spare parts, otherwise this may result in consid-
erable danger to the user.
DANGER!
Check that the belt disc sander is in sound condition and good working
order. Take immediate action to repair or replace damaged parts.
Use recommended parts only
- Unapproved parts may be dangerous and will invali-
date the warranty.
WARNING!
Only operate on a level and stable surface.
WARNING!
Do not allow untrained persons to operate the machine and do not oper-
ate the machine without all covers etc. correctly fitted.
WARNING! RISK OF ELECTRIC SHOCK.
Do not expose the belt disc sander to water
spray, rain, dripping water or moisture of any kind.
Do not move or handle the machine when it is running.
Do not leave the machine unattended when in use. Switch the machine off and
unplug from the mains supply before leaving the work area.
Do not allow children or animals near the belt disc sander, particularly when in use.
21
PARTS LIST Continued...
No.
Description
SIP Part No.
79
Table support
WD02-00083
80
Bolt M6 x 20
WD02-00084
81
Baffle plate
WD02-00085
LEG STAND & MITRE GUIDE PARTS LIST
No.
Description
SIP Part No.
No.
Description
SIP Part No.
82
Mitre guide handle
WD02-00086
87
Pointer
WD02-00091
83
Fence
WD02-00087
88
Guide bar
WD02-00092
84
Mitre guide body
WD02-00088
89 Leg stand complete
WD02-00093
85
Bolt
WD02-00089
90
Foot
WD02-00094
86
Thumb nut
WD02-00090
