12
Fitting The Accessories
Attach both frame brackets to the sander using
the cap-head bolts. Be aware that the table
bracket pins should be pointing outwards once
the brackets are fitted. As shown on page 13.
Parts:
2x Frame brackets
2x Angle guide
2x Table bracket
1x Table
1x Mitre guide
1x Fence
ASSEMBLY INSTRUCTIONS….cont
Fit the belt disc sander to the leg stand using the 4 bolts, nuts and washers supplied,
Below diagram is how your belt disc sander should look like.
Note:
Due to the weight of the sander; at least 2 persons are required to lift it
safely.
13
ASSEMBLY INSTRUCTIONS….cont
Locate the angle guide and knob and attach to
one side of the sander; Repeat steps for the 2nd
guide - Please note that one angle guide will be
facing inwards).
Next slide the table bracket onto the frame
bracket pin. Bolt the angle guide onto the
table bracket. Repeat steps for the other
side.
Fix table to table brackets using the 4
bolts supplied.
Slide mitre guide onto table as shown in picture.
