Sinterit POWDER SIEVE User Manual | 11
5. Initial startup of the Sinterit POWDER SIEVE after delivery
1. Carefully pull the powder sieve out of box 1 and remove the transport protections.
2. Place on a stable and hard surface (it is recommended for it to be the target location of the powder sieve).
ATTENTION!
Before installing the Sinterit POWDER SIEVE, carefully check if it hasn’t been damaged during
transport.
CAUTION!
•
The Lid
1
is heavy!
•
The danger of crushing upper limbs when lowering the Lid.
IMPORTANT!
When opening the Lid or Door, hold it by the handles
3
,
6
, as they open violently.
3. Open the Lid
1
from the top chamber and remove the transport protections.
4. Open the Door
5
and remove the Metal container
A
by pulling the Flange
12
up.
5. Remove the Power supply
B
from the box (should be inside a Metal container).
6. Put the Metal container back under the Flange. Watch your fingers!
7. Check the levelling of the powder sieve. In case of problems, correct with Adjustable mounting feet
7
.
8. Connect the Power supply
B
to the Power socket
9
and screw the Flange connector
B’
(correct connection –
drawing on the safety plate) (Image 6). Next, connect to the power source.
9
DO NOT REMOVE THIS LABEL!
Manufacurer:
SINTERIT Sp.z o.o.
ul. Nad Drwiną 10 bud. B3, 30-741 Kraków, Poland
www.sinterit.com
Contact: +48 570 967 854, [email protected]
Name:
SINTERIT POWDER
SIEVE
Serial number:
042020140070
Manufactured:
Made in: EU, POLAND
IP30
Class 3
Machine type:
HORIZONTAL VIBRATING SIEVING MACHINE
Dimensions:
360 x 340 x 600 [mm]
14.7 x 13.4 x 126.6 [in]
Total weight:
22.5 [kg]
49.6 [lb]
Rated voltage
12 V [DC]
Power consumption
24 [W]
Sockets
polarity
AC adapter
12 [V] ~ 5.0 A
Rotating parts speed
3000 [rpm]
WARNING! Read and understand operator’s manual and all other safety instructions before using this machi-
ne. Failure to follow operating instructions could result in serious injury.
B’
Image 6. Correct connection of the Power supply to the powder sieve.
