Sinterit POWDER SIEVE User Manual | 7
4. Important safeguards and warnings
IMPORTANT!
•
To ensure the safe use of the Sinterit POWDER SIEVE product, please read and follow the
instructions below.
•
Keep this manual for future use. Also, be sure to follow all warnings and instructions marked
on the product.
IMPORTANT!
Only trained and qualified personnel should install, replace or service the equipment and the
device should be installed in accordance with these instructions.
A. ENVIRONMENT AND PLACE OF INSTALLATION
WARNING!
•
The powder sieve must be positioned protected against atmospheric agents (rain, hail,
snow, fog, dusts in suspension, etc.) with an environmental running temperature between
5°C and 45°C and relative humidity not above 70%.
•
Do not place or store the product in places subject to shocks, vibrations.
•
The work environment must be clean, well-enough lit and devoid of the explosive atmosphere
(in areas with high dust).
•
The product should be placed on a flat, stable surface that extends beyond all edges of the
product. The product will not work properly if it is set at an angle.
WARNING!
•
Fire and explosion hazard!
The device must not be operated in a corrosive or
explosive environment.
•
Avoid using the device near water, close to open flames or sources of heat.
•
Do not place or store the product near inflammable and volatile substances,
concentrated acids or corrosive vapours.
•
Avoid prolonged contact with solvents and inhaling their vapours.
B. GENERAL SAFETY RULES
WARNING!
•
Only adults should use powder sieve.
•
When using the machine, mind other people, especially children.
•
Climbing on the powder sieve is forbidden.
ATTENTION!
•
Risk of crushing upper limbs while closing the Lid
1
from the top chamber.
•
Never place hands between the Door
5
and front chamber while locking.
•
Do not put hands between Flange adapter
13
and Metal container
A
during
assembly.
ATTENTION!
•
Check the device previous to each use for damaged and/or defect parts.
•
In case of a defect, or when the machine does not function properly, first have it repaired by
a specialized person/company.
