Sinterit POWDER SIEVE User Manual | 9
STOP!
•
Never touch electric wires, switches, buttons, etc. with wet hands.
•
Do not spill liquid on the product.
•
Do not put any containers on the equipment, in particular containing water.
•
Do not block or cover the vents and openings in the product.
•
Do not touch live parts.
WARNING!
•
Disconnect the plug whenever it is planned to shift/transfer the machine.
•
If the device is not used for a long time (e.g. vacation), unplug the power
supply from the socket.
E. SAFETY DURING SIEVING, REPAIR AND MAINTENANCE
WARNING!
In the following situations, unplug the product from the power supply and contact qualified
service personnel:
•
the power cord or plug is damaged;
•
some liquid got into the product;
•
the product has been dropped or the case damaged;
•
the product does not operate properly or clear changes in efficiency have been observed.
Failure to heed these instructions may cause damage to materials and/or injures!
STOP!
•
Never disassemble, modify or repair the power supply, plug or devices inside the sieve,
except as described in the product’s manual.
•
Do not adjust controls that are not described in the manual.
WARNING!
•
All maintenance operations must be executed in a non-classified atmosphere.
•
Only skilled persons should carry out repairs.
•
Read the operator’s and maintenance manual carefully before using the cleaner or doing any
maintenance jobs.
•
During cleaning operations, maintenance jobs or when changing parts, the Power button
must be off and the machine must be unplugged by removing the cable from the socket.
•
During maintenance jobs, affix a notice to the appliance indicating „MACHINE BEING
SERVICED, DO NOT START”.
