Key or
Key
7) Enter the display mode of the third zero position.
Key
The setting of all the subsidiary zero positions of the working piece
shown in Fig. (1) has been finished.
Why the direction of each coordinate of your input auxiliary
zero-position opposite to that of the display result? As the above example
illustrates, under the user coordinate display mode, if your enter the coordinate
of auxiliary zero position on the position of the zero position under absolute
state, the display result will be the position of absolute state zero position in
this user coordinate. Because the user coordinate display mode uses each
auxiliary zero position as the origin of user coordinate. Seeing from Fig. 1,
Point O is exactly located at the position of Point 1(5, -25), the position of
Point 2 (10, -75) and that of to Point 3(10, -100). If the operator enters the
coordinate of auxiliary zero point at any other point than the zero-point under
absolute state, the display result will be the position of this point in this user
coordinate.
Method 2: Clearing when the position is reached. When the machine
tool is at the position of the subsidiary zero point, key .
Method 2 is not suited to operations on grinding machine. The
instructions for lathe are not given in details in this manual.
Ⅳ
Ⅳ
Ⅳ
Ⅳ
. The usage of subsidiary zero positions
After entering the display mode of the UCS, the corresponding subsidiary
zero positions may be used to help in the processing.
It is possible to enter a UCS display mode using key
O
or .
When using keys and , you may key or continuously until
entering the desired UCS.
When using key just key and under the prompt “ZERO No” enter
the number of the desired UCS. For the related operations, the operator may
L
E
E
N
N
N
SEL
SEL
P
Summary of Contents for SDS2-2G
