25
50
50
150
45
5
10
1(-5,25)
2(-10,75)
3(-10,100)
E
A
C
B
D
0(0,0)
X
Y
grinding wheel
subsidiary zero position will also change by the same distance and angle.
Ⅱ
Ⅱ
Ⅱ
Ⅱ
. The operator may fully make use this function as the
following:
1. Set the zero position in absolute mode (ALE lamp on) at the main reference
point of the working piece, for example, Point O in Fig. (1) in next page.
Set subsidiary zero positions at subsidiary reference points of the working
piece, for example, Points 1, 2 and 3 in Fig. (1). It is possible to enter the
display mode of every UCS taking a subsidiary zero position as its original
points to perform the processing when need.
2. In the display mode of every UCS, processing with various special function
can be performed.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
. The setting of subsidiary zero position
There are two methods of setting subsidiary zero position: the one is
entering the position of the subsidiary zero position directly, the other is
resetting once a subsidiary zero position is reached.
Method 1: Directly Entering, under the UCS display mode, key
Number keys .
Take Fig. (1) as example: After turning the machine on, move the
machine tool to the center point O in Fig.(1), Enter the absolute display mode.
Fig. (1)
Summary of Contents for SDS2-2G
