34
Select the cutter compensation direction (to be used when processing in
the XY plane)
The following parameters shall be input for simple arc processing:
Plane to be processed: 0-XY, 1-XZ, 2-YZ
Processing mode: Select one of the eight modes according to the
indication as shown in the figure.
Arc radius: The radius value of the arc to be processed
Cutter diameter: The diameter value of the cutter used for processing
Max. cutting volume: The length of arc at each processing interval
Inner or outer arc: mode of arc to be processed (this parameter is
especially for XY plane processing)
Example 1:
The arc AB of 90° as shown in Figure 4.4-1 is to be processed
from point A (starting) to point B (end).
The parameters are set as follows:
The plane to be processed: XY
Processing mode: 3
Arc radius: 20mm
Cutter diameter: 5m
Max. cutting volume: 1mm
Inner or outer arc: 1-T+TOOL
Operation steps:
1. In normal display status, select metric system in the metric system/British
system option.
2. Move the drilling machine. Align the cutter to A point. Carry out
zero clearing respectively for X axis and Y axis.
3. The interface of simple arc processing is displayed.
Press
. The interface of simple arc processing is displayed.
Inner arc machining (T-TOOL)
Outer arc machining (T+TOOL)
Diagram 4.4-1
Summary of Contents for SDS 2-3VA
Page 1: ...LCD DIGITAL DISPLAY SDS 2 3VA OPERATION MANUAL...
Page 6: ...1...
Page 53: ...V1 0 202110...
