26
3. Input the length of the oblique line.
Press
in sequence.
4. Input the angle of the oblique line.
Press
in sequence.
5. Input the number of holes to be made
along the oblique line (at an equal interval).
Press
in sequence.
6. The interface of “Proc” is displayed.
Press
or
to switch over between the numbers of the
processing points.
Move the machine tool to the position where 0 is displayed in both
the X window and Y window.
Punching can be started at that point.
7.After processing is completed,
press
to return to the normal
display status.
5.2 Making holes along a circle
Function introduction: The function of making holes along a circle (at an
equal interval) is provided at the display. With this function, holes equally
distributed along a arc (or circle) in the XY plane can be processed
After the interface of the function of making holes along a circle (at an equal
4
Summary of Contents for SDS 2-3VA
Page 1: ...LCD DIGITAL DISPLAY SDS 2 3VA OPERATION MANUAL...
Page 6: ...1...
Page 53: ...V1 0 202110...
