30
1. Press
. The interface of the function of oblique plane processing is
displayed.
2. Select the plane to be processed, 0 (XY) plane.
3. Input the angle of the oblique plane.
4. Move the workbench, so that the
measurement tool (such as the dial indicator) which has been properly
installed (clamped) at the milling machine lightly contacts the oblique
plane,
and adjust it to zero point, and move the workbench along the X-axis
direction
for any distance.
5. Press
key. Move according to the display along the Y-axis direction until
zero is displayed.
6. Adjust the angle of the work piece, so that the work piece contact the
measurement tool. And continue until zero is displayed.
For example: Calibrate the angle of the work piece to
45°
, as shown in Figure
(b).
1) Put the work piece on the workbench at approximately
45°
.
push
2) Select the plane to be processed.
Press
to select the XY plane.
push
3) Input the angle of the oblique plane.
push
4) The interface of “Proc” is
displayed.
Press
or
to switch over
between the numbers of the processing points.
Move the machine tool to the position where 0 is displayed in both the X
window and Y window.
Punching can be started at that point.
5) Move the workbench along the X-axis direction until the measurement
0
Summary of Contents for SDS 2-3VA
Page 1: ...LCD DIGITAL DISPLAY SDS 2 3VA OPERATION MANUAL...
Page 6: ...1...
Page 53: ...V1 0 202110...
