18
will run based on the mode set by the control panel. For mini chillers, it can be set to "
On"
or "
Off
".
3.For mini chillers, it can be set to "On" or "Off".
[Notes]
●When “
Water tank
” is set to “
Without
”, the “
Air + hot water
” mode is unavailable.
●When “
Floor debug
” and “
Emergen.mode
” have activated, function of the thermostat will be invalid.
●When “
Thermostat
” is set to “
Air
” or “
Air + hot water
”,
“
Temp.timer
” will be deactivated automatically
and the unit will run based on the mode set by the thermostat. Meanwhile, mode setting and On/Off operation by
the control panel will be ineffective.
●When “
Thermostat
” is set to “
Air
”, the unit will run based on the setting of the thermostat.
●When “
Thermostat
” is set to “
Air + hot water
”, when the thermostat is turned off, the unit can still perform the
“
Hot water
” mode. In this case, the ON/OFF icon at the homepage does not indicate the running status of the unit.
Running parameters are available at the parameter viewing pages.
●When “
Thermostat
” is set to “
Air + hot water
”, operation priority can be set by the control panel (see Section
2.2.3 and 2.2.4 for more details.)
●The status of the thermostat can be changed only when the unit is turned off.
●When it has been activated, “
Floor debug
”, “
Air removal
”, and “
Emergen.mode
” are not allowed to be
activated.
●This setting will be memorized upon power failure.
2.4.6 Other Thermal
[Operation Instructions]
1. At the commissioning parameter setting page, by touching “
Other thermal
”, the control panel will access to
the corresponding setting page.
2. At the “
Other thermal
” setting page, “
Other thermal
” can be set to “
With
” or “
Without
”, “
T-Other switch on
”
can be set to the desired value. When “
Other thermal
” is set to “
With
”, it is allowed to set the operating mode for
the backup thermal source.
[Notes]
●This setting will be memorized upon power failure.
●There are three working logics for it.
