Sinclair SMH-100IRB, User Manual

Page: 16 / 41

13
water tank is unavailable, the preset mode can only be “ Heat ” or “ Cool ”.
● “ Start timer ” should be earlier than “ End timer ”, otherwise a dialog will pop up, saying “ time setting wrong ”.
● The setting for “ Preset mode ” will works until it has been canceled manually.
● When “ Start timer ” is reached, the unit will perform the preset mode. In this case, mode and temperature
setting are still allowed but will not be saved to the preset mode. When “End timer ” is reached, the unit will
perform OFF operation.
●This function will be memorized upon power failure.
● When “
Weather depend ” has been activated and the mode for “ Preset mode ” is set to “ Hot water ”, “ Weather
depend ” will be deactivated when the setting mode has been switched.
2.2.15 Error Reset
[Operation Instructions]
At the function setting page, by touching “Error reset”, a choice box will pop up, where by touching “OK” the
error will be reset and by touching “Cancel” the error will not be reset.
[Notes]
● It can be performed only when the unit is turned off.
2.2.16 WiFi Reset
[Operation Instructions]
At the function setting page, by touching “WiFi”, a choice box will pop up, where by touching “OK” , the WiFi
setting will be reset, and by touching “Cancel” the choice box will quit and WiFi will not be reset.
2.2.17 Reset
[Operation Instructions]
At the function setting page, by touching “Reset”, a choice box will pop up, where by touching “OK” all user
parameter settings will be reset and by touching “Cancel” it will back to the function setting page.
[Notes]
● This function is allowed only when the unit has turned off.
● This function is valid for “Temp. timer”, “Clock timer”, “Preset mode”, “Weekly timer”, and “Weather depend”.
2.3 User Parameter Setting
[Operation Instructions]
1. At the menu page, by touching “PARAMETER”, it will back to the parameter setting page, as shown in the
figure below.