Sinclair SMH-100IRB, User Manual

Page: 13 / 41

10
[Notes]
● When “ Clock timer ” has been set and “ Hot water ” mode is involved, in this case, if “ Water tank ” is changed
to “ Without ”, “ Hot water ” will be automatically switched to “ Heat ”, and “ Cool/Heat + Hot water ” will be switched to
“ Cool/Heat ”.
● When “ Weekly timer ” and “ Clock timer ” have been set at the same time, the priority will be given to the
former.
● When the water tank is available, “ Heat ”, “ Cool ”, “ Hot ”, ‘ Heat + Hot water ”, and “ Cool + Hot water ” are
allowed; however, when the water tank is unavailable, only “ Heat ” and “ Cool ” are allowed.
● When the end time is earlier than the start time, this setting is invalid.
● Water tank temperature can be set only when “
Hot water ” is involved in the operation mode.
● The setting of “ Clock timer ” only works once. If this setting is needed again, it should be set again.
● It will be deactivated when the unit is turned on manually.
● When “
Weather depend ” has been activated and the mode for “ Clock timer” is set to “ Hot water ”, “ Weather
depend ” will be deactivated when the setting mode has been switched.
● This function will be memorized upon power failure.
2.2.11 Temp. Timer
At the function setting page, access to the “ Temp.timer ” setting page.
At the “ Temp.timer ” setting page, it can be set to “ On ” or “ Off ”.
Select “ Period 1 ”/” Period 2 ” and a window will pop up, where time period can be set. Then select " WT-Heat1/
WT-Cool 1/2 ” and also a window will pop up where temperature can be set.