Sinclair SMH-100IRB, User Manual

Page: 15 / 41

12
2.2.13 Holiday Mode
[Operation Instructions]
At the function setting page, select “
Holiday mode
” and set it to “
On
” or “
Off
”
.
[Notes]
● This function can be activated only when the unit has been turned off, otherwise a prompt dialog box will pop
up, saying “ Please turn off the system frist! ” .
●When “
Holiday mode
” has been activated, the operation mode will automatically switch to “
Heat
”. Mode
setting and “ On/Off " operation through the controller will be unavailable.
●When “
Holiday mode
” has been activated, the controller will automatically deactivate the “
Weekly timer
” and
“ Preset mode ”and “ Clock timer ” and “ Temp.timer ”.
●Under the “
Holiday mode
”, when the unit is under the control of room temperature, the set point (room
temperature for heating) should be set to 10°C; when it is under the control of leaving water temperature, the set
point (leaving water temperature for heating) should be 30°C.
● When this function has been activated, “ Floor debug ”, “ Emergen.mode ”, “ Disinfection ”, “ Manual defrost ”,
“
Preset mode
”, “
Weekly timer
”, “
Clock timer
”, and “
Temp.timer
” cannot be activated at the same time,
meanwhile a window will pop up, saying “ Please disable the holiday mode! ”.
●This function will be memorized upon power failure.
2.2.14 Preset Mode
[Operation Instructions]
At the function setting page, select “
Preset mode
” and go to the corresponding setting page.
At the time period setting page, each time period can be set to “ Valid ” or “ Invalid ”.
The option “ Mode ” is used to preset the mode; “ WOT-Heat ” is used to set the leaving cold/hot water
temperature; “ Start timer ” / “ End timer ” is used to for time setting. After that, by touching the “ Save ” icon, all
settings will be saved.
[Notes]
● When “ Preset mode ” has been set to “ Hot water ” and “ Water tank ” is to set to “ Without ”, the preset “ Hot
water ” mode will be automatically switched to “ Heat ”.
● When “ Weekly timer ” and “ Preset mode ” both have been set, priority will be given to the latter.
● When the water tank is available, the preset mode can be “ Heat ”, “ Cool ”, or “ Hot water ”; however, when the