Simrad SP90 - REV E, Installation Manual

Page: 99 / 232

Connecting peripheral equipment
87
851-164510 / Rev.E
8 PERIPHERAL EQUIPMENT
8.1 General
Introduction
It is not necessary to make the connection of the peripheral
equipment before the start-up procedure is finished, and this
equipment may therefore be connected later. However, do not
connect the termination plugs for the auxiliary equipment to the
Sonar Interface Unit before mentioned in a later chapter.
Required inputs
The SP90 sonar system requires input from both a speed log
and a course gyro . Inaccurate data from either of these
instruments will result in an incorrect indication of vessel and
target movements.
→
Speed log, page 89
→
Course gyro, page 91
Additional inputs
The following peripheral sensors may be connected to the SP90
sonar:
→
(D)GPS, page 92
→
Echo sounder, page 93
→
Trawl System, page 94
→
Purse seine system, page 95
→
Current meter system, page 96
→
Radio buoy system, page 97
→
Trackball and mouse, page 98