Simrad SP90 - REV E, Installation Manual

Page: 126 / 232

Simrad SP90
114
851-164510 / Rev.E
Full screen
11 Check the Full screen function.
a Press the Menu button (field 6, left button)
b Check that the menu disappears for a Full Screen echo
presentation.
c Press the button once again to recall the menu.
View menu
12 Check the View menu.
a Move the cursor to any position inside the echo area.
b Press the View button (field 6).
c Check that the View menu appears. (Note that this
menu must be regarded as an object menu, and it
appears next to the cursor in the echo field.)
d Press the Select button again to remove the menu.
Object menu
13 Check the Object menu.
a Move the cursor to a new position inside the echo area.
b Press the Object button (field 6).
c Check that an Object menu appears. (Note thas this
menu appears next to the cursor in the echo field.)
d Press the Select button again to remove the menu.
Manual and automatic tilt
14 Check the Tilt readout.
a Select the Horizontal menu.
b Press the Tilt Up/Down buttons (field 7) repeatedly.
c Check that the tilt readout in the menu corresponds
with the
Tilt indicator shown in the top left corner of
the display.
d Press the Auto button.
e Check that the tilt limits appear on the Tilt indicator .
f Press Manual to stop the automatic tilt program.
Zoom view
15 Check the Zoom function.
a Select Mode 1 (Bow Up).
b Move the cursor to an echo, and press the Zoom button
(field 8).
c Check that the echo is zoomed up.
d Press the Zoom button again.
e Check that the echo is brought back to its normal size.