70
381295/B
Procedure
1
Click in the view you want to activate.
The active view is identified with a thicker border. Unless you use the
Apply to all
function, all changes you make will only be applied to this view.
2
Turn the relevant rotary switch to make the adjustment.
Tip
The Operating Panel is fitted with three rotary switches. The switches are identified
with numbers. Each switch can be assigned a function related to range, gain or
bearing. Investigate the functionality provided on the
Operating Panel
page. This
page is located in the
Installation
dialog box.
Optionally:
3
In a
Horizontal
view, select the bearing line and drag it sideways.
Optionally:
4
Observe the
Main
menu.
Its default location is on the right side of the SN90 presentation.
5
Select
Bearing
.
6
Make the necessary adjustment.
The following methods can be used to adjust this setting:
a
Select [
+
] or [
-
] to choose the requested setting.
b
Place the cursor on the button. Press and hold the left mouse button. Move the
cursor horizontally over the button. Release the mouse button when requested
value is shown.
c
Select the middle of the button to open it. If you have a keyboard connected to
the SN90, type the requested value.
7
Open the button and select
Apply to all
if you wish to use the chosen setting in all
the views in the current presentation mode.
Related topics
Controlling the gain and range settings, page 63
Simrad SN90 Operator Manual
Summary of Contents for SN90
Page 2: ......
Page 186: ... 2020 Kongsberg Maritime ...
Page 187: ......
Page 188: ...Simrad SN90 Purse Seine and Trawling sonar Operator Manual ...
