381295/B
57
E
Playback Progress
: This bar shows you the progress of the replay sequence. If
you have chosen to restart the replay file(s) automatically (in a loop), the green
indicator starts from left every time the file restarts.
Procedure
1
Open the
Operation
menu.
2
Set
Operation
to
Replay
.
The replay bar opens automatically. It is positioned directly below the top bar at the
top of the SN90 presentation.
If you need to select which files to replay, select
Replay File
under the
Operation
button. You can also select the large button in the middle of the replay bar.
3
Select
Play/Pause
to start the playback.
4
To stop the replay choose any other operating mode.
Related topics
Choosing operating mode and key transmit parameters, page 55
Selecting
mode to start "pinging", page 55
Recording and replaying echo data, page 87
Choosing which echo data file(s) to replay, page 90
Selecting
Inactive
mode
Inactive
mode is provided to pause the SN90 operation temporarily. Neither transmission
nor reception will take place. The current echoes will be removed from the presentation.
Context
The
Operation
function controls the operating mode of the SN90. You can set it to
Normal
,
Replay
or
Inactive
.
Note
Note that Inactive operating mode is not the same as Passive mode. While Inactive mode
stops both transmission and reception, Passive mode will still allow the SN90 to receive
echoes. To select passive mode set
Operation
to Normal and
Tx Power
to Off.
Procedure
1
Open the
Operation
menu.
2
Set
Operation
to
Inactive
.
Summary of Contents for SN90
Page 2: ......
Page 186: ... 2020 Kongsberg Maritime ...
Page 187: ......
Page 188: ...Simrad SN90 Purse Seine and Trawling sonar Operator Manual ...