| 9
Introduction |
MX610/MX612 Operator and Installation Manual
Status Bar Indications
Mode Indicator
Icon
Description
Definition
GP
GPS Position
Position displayed is calculated using GPS satellites
GN
GPS +GLONASS
Position
Position displayed is calculated from combined GPS and
GLONASS satellites
¼
Notes:
1.
This feature is available in SIMRAD MX610/MX612 CDUs with software version 1.0.42.235 or
higher.
2.
When GPS+GLONASS (GNSS) mode is selected, the NMEA 0183 data headers are changed
from $GPxxx to $GNxxx.
GPS/GLONASS selection
By default, the SIMRAD CDU is set to navigate using the GPS satellite system. When using the
MX521B smart antenna or the HS80A/MX575D smart GPS compass models, the SIMRAD CDU
can be controlled to navigate using combined solutions from GPS and GLONASS satellites.
Setup procedure to use GPS and GLONASS satellites:
1.
Press the
MENU
key.
2.
Scroll Tools & Settings menu, press
ENT
.
3.
Scroll to GPS icon under the Settings page, press
ENT
.
4.
Scroll to GNSS Mode, press
ENT
.
5.
Scroll to GPS+GLONASS, press
ENT
.
6.
Press the
CLR
key repeatedly or press any hot key to exit.
www.busse-yachtshop.de | [email protected]
