| 37
System configuration |
MX610/MX612 Operator and Installation manual
REMOTE
PORT3
PORT1
PORT2
PORT4
SUPPLY
+ -
TERMINATION
SIMNET
SIMNE
T
BLU
BRN
ORG
GRN
YEL
WHT
RED
BLK
MX521A
MX521B
MX61xJB PCB Terminals
ANTENNA C
ABLE
GRY
PRPL
RX+ RX
-
TX+ TX
-
NMEA 0183 PORT
CONNECTOR TERMINALS
+12/24 VDC
NEG
Ext. RTCM
@4800 Baud
-
+
Mixed Mode
This feature allows position calculation using all available satellites
in view whether they have differential correction data or not. In
areas where beacon differential signal from land-based station or
SBAS is marginal and only partial satellite correction is available, it
may be useful to use the MIXED mode selection.
Reset Procedures
In order to access the RESET functionality, the following software
versions have to be in place:
• MX61x CDU - s/w version 1.0.42.235 (or newer),
• MX61xJB junction box - s/w version 1100 100121 (or newer)
How to RESET the Junction Box:
(MX610JB & MX612JB)
1.
Press the
MENU
key.
2.
Scroll to Tools & Settings, press
ENT
.
3.
Scroll to NETWORK, press
ENT
.
4.
Scroll to “NMEA Over MX61xJB”, press
ENT
.
5.
Scroll to either “Restore to Default” or “Power Reset”, press
ENT
.
6.
Press the
CLR
key repeatedly or press any hot keys to exit.
MX612 with 12 Ports
MX610 with 4 Ports
Where:
• Power Reset - cycles the power to the junction box.
• Restore to default - restores baud rate of ports as per the table below.
www.busse-yachtshop.de | [email protected]
