| 7
Introduction |
MX610/MX612 Operator and Installation Manual
Introduction
MX610/MX612 Front Panel and Keys
MOB
MENU
POS
NAV
HDG
AIS
USB
9 10 11
1 2 3
12
4
8
USB
14
12
13
6
7
5
PAGE
ENT
CLR
No.
Key Description
1
PAGE
key: Brings up different screen page every time this key is pressed or to
change tab in the settings and tools menu.
2
MENU
key: Brings up the quick menu dialog box.
3
PWR/LIGHT
key
Short press - to turn ON the unit.
Momentary press brings up the backlight and night view controls.
Series of short presses will cycle through 6 levels of display brilliance.
Long Press - to turn power off.
4
ROTARY KNOB:
Rotate to scroll through menu list, icons, alphabets or numbers
in the virtual keypad and zoom-in or out in the PLOT mode. Press the center of the
knob to select menu item or accept entry. The same entry action when you press
the
ENT
key.
5
CLR
key: Press to clear, escape or back out of the menu or data entry.
6
ENT
key: Press to accept menu selection or data entry. The same action as pressing
the center of the rotary knob.
7
MOB
key: Short press will save the present position L/L into the next vacant
waypoint. Press and hold for 3 seconds activates the Man-Over-Board (MOB)
function.
8
POS
key: Hot key to display the present position Latitude, Longitude, COG, SOG,
Date and Time. Press repeatedly to show POS1, POS2 or POS3 screens.
9
NAV
key: Hot key to display the navigation information. Press repeatedly to show
NAV1, NAV2 or NAV3 screens.
10
HDG
key: Hot key to show the compass rose, Pitch, ROT and Yaw information
coming from a gyro or a GPS compass. Press repeatedly to show HDG1 or HDG2
screens
11
AIS
key: Hot key to display the PLOT screen showing your vessel, waypoints, route
and other navigation information. Will show AIS targets when connected to an AIS
receiver via the NMEA 2000 network.
12
USB
door: To open, lift the right tab and slide the cover to the right. To close, slide
cover to left and push the tab down. Close USB door at all times to prevent moisture
intrusion. (MX610 and MX612 only)
13
USB
key: Press to display the files contained in the USB memory stick.
14
USB
Connector
1
www.busse-yachtshop.de | [email protected]