| 33
System configuration |
MX610/MX612 Operator and Installation manual
To activate the Printer Output, use the procedure below:
1.
Press the
MENU
key.
2.
Turn the rotary knob to scroll down to Tool & Settings menu then press
ENT
.
3.
Scroll to Network then press
ENT
.
4.
Scroll down to NMEA 0183 over junction box then press
ENT
.
5.
A list of port numbers will be shown. The MX610JB has 4 ports while the MX612JB has 12
ports.
6.
Scroll to the port you want to use (i.e. Port 1) then press
ENT
to bring up the “- -Device con-
figuration” screen.
7.
Uncheck the “CH Output” function. This will turn off any NMEA 0183 messages that may be
on.
8.
Scroll to Printer Output, press
ENT
.
9.
Click on the printing time desired (Off, 1 Min, 30 min, 1 Hr, 2 Hr or 3 Hr).
10.
Select Close and press
ENT
.
T
T
12/24V DC
MX61xJB
12/24V DC
Where:
N2K Backbone
Drop line
NMEA 0183 line
MX610/MX612
MX521
MX521A
MX521B
Ports 3&4
Thermal
Printer
RS-232 to RS-422
Converter
P1
RX+ RX- TX+ TX-
GND
+12V
RD(B)
RD(
A
)
TD(
A
)
TD(B)
B&B Elect.
Model: 422LP9TB
RS232-RS422
Converter
P1 (or any JB Port)
9-Pin dB
connector
To Printer
(25-Pin dB
Connector)
www.busse-yachtshop.de | [email protected]
