32 |
System configuration |
MX610/MX612 Operator and Installation manual
List of NMEA messages supported by the Junction Box
Classification
NMEA Message
Description
GPS
GGA
GPS system fix data
GLL
Geographic position
GSA
GNSS DOP and Active Satellites
GSV
GNSS Satellites in view
GRS
GNSS Range Residuals
GBS
GNSS Satellite Fault Detection
GNS
GNSS Fix Data
VTG
Course over ground and speed over ground
ZDA
Time and Date
DTM
Datum
RMC
Recommended minimum specific GNSS data
RMB
Recommended minimum navigation information
ALR*
Set alarm state*
NAV
APB
Autopilot Sentence “B”
XTE
Cross-Track error
WPL
Waypoint Location
RTE
Routes
ECHO
DPT
Depth
VHW
Water speed and heading
Compass
HDG
Heading, deviation and variation
HDT
Heading, True
ROT
Rate of Turn
THS
True heading and status
AIS*
VDx*
AIS messages (VDO & VDM)*
* Consideration for future implementation
Printer Output
This menu item controls the printer output. NMEA ports 1 or 2
can be configured to output to a printer. Printer time settings
are Off, 1 min, 30 min, 1 hr, 2 hr or 3 hr interval (typical setting
is 1 hr). Use 1 min to test the printer function, then set it to the
desired print time thereafter.
The printer output is simple ASCII text designed to operate on
any serial printers (i.e. EPSON thermal printer Model M267A
@ 38,400 baud). An RS-422 to RS-232 converter is needed to
match the electrical standard of the printer.
A sample of the printer format is shown below:
Simrad MX 610/612 Navigation System
========================================
18:06:59
UTC
09 2 2015
Differential GPS Fix
Latitude: 33 48.5084’ N
Longitude: 118 21.0106’ W
COG: 320.76 SOG: 5.00 kn
www.busse-yachtshop.de | [email protected]
