Simrad IS40 PRO, Operator'S Manual

Page: 9 / 32

| 7
Basic Operation | IS40 PRO Operator Manual
Optional data pages
From factory the display shows Rudder Angle page only. Six
additional data pages may be enabled to show a variety of boat
data and information available from sensors and devices on the
network.
¼
Note:
Only the Rudder Angle pages are Wheelmark approved.
Below is an example with six additional pages enabled.
Each press of the
Page
key will change the current data page to the
next preselected page in the cycle.
¼
Note:
If a data page has been shown for more than 5 seconds, first
press on the
Page
key will show Rudder Angle page.
¼
Note:
Two or more pages need to be enabled for the
Page
key to
function.