Simrad IS40 PRO, Operator'S Manual, Page: 18 / 32

16 |
Setup | IS40 PRO Operator Manual
Data
The data list shows the data type that the device is transmitting.
Configure
Instance
Enter a number to differentiate between instances of the same
device.
Offset
Certain devices will let you enter an offset value to compensate for
the position of the sensor or variation of sensor data.
¼ Note:
Some devices can be configured further. If a device transmits
other data it may be shown on this page also.
Remote Displays
When B&G HV displays are available on the network, they can be
configured from the IS40 PRO. Follow the instructions on the screen
to get the desired data.
Calibration
Sensors that can be calibrated are listed in the calibration menu.
For magnetic Compass Heading sensors like RC42, calibration
is required. For calibration, select Calibration and follow the
instructions on the display.