Simrad IS40 PRO, Operator'S Manual

Page: 27 / 32

| 25
Maintenance | IS40 PRO Operator Manual
Maintenance
General maintenance
The instruments are repair-by-replacement units, and the operator
is therefore required to perform only a very limited amount of
preventive maintenance.
If the unit requires any form of cleaning, use fresh water and a
mild soap solution (not a detergent). It is important to avoid using
chemical cleaners and hydrocarbons such as diesel, petrol etc.
Always put on the weather cover when the unit is not in use.
Checking the keys
Make sure that no keys are stuck in the down position.
Checking the connectors
The connectors should be checked by visual inspection only. Ensure
that cables are connected correctly and any unused terminals are
protected.
Software information and upgrade
To find out the latest version of software available for your display,
go to the Simrad website pro.simrad-yachting.com
To verify what software you are currently running, go to the software
information page on your display.
3