Simrad FM90 Reference Manual Download Page 78

Page: 78 / 140

922-00027001/2.2

Sensors

Sensor Setup dialog box

This dialog box allows you to define your catch monitoring sensors, improve the catch
monitoring sensor receive signal, and enter sensor offsets to correct readings.

Sensor Export dialog box

The

Sensor Export

dialog box allows you to control the properties of each available

communication channel providing output from the FM90 Processor Unit, and to select
which data to export.

External Sensor Import dialog box

The

Sensor Import

dialog box allows you to configure external sensors such as the GPS

and Heading sensor to provide navigation information.

Depth graph

Click this button to open the Depth graph. The Depth graph shows the recorded depth
as a function of time.

Temperature graph

Click this button to open the Temperature graph. The Temperature graph shows the
recorded temperature as a function of time.

Simrad FM90 Reference Manual

Summary of Contents for FM90













































































































































Search results

Summary of Contents for FM90

Reviews:

Related manuals for FM90

Brands by name

Popular brands

Simrad FM90, Reference Manual

Search results

Summary of Contents for FM90

Reviews:

Related manuals for FM90

Brands by name

Popular brands